Notes

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
======Brocade VDX 6720======


=====Notes=====


====Default passwords====

^account^Default password^
|root|fibranne|
|admin|password|
|user|password|

Source: [[https://www.web-workers.ch/index.php/2019/08/12/how-to-change-default-password-of-brocade-fibrechannel-san-switches/|Web Workers - How to change default password of Brocade fibre channel SAN switches]]


====Change password=====

Change password of admin and user:
<code>
username admin NEWPASSWORD
username user NEWPASSWORD
</code>


====Connect with recent versions of OpenSSH====

The VDX6720 uses an old version of sshd with an old HostKeyAlgorithm that newer versions of ssh no longer allow by default.

To connect to a VDX6720 with ssh you must provide the correct older HostKeyAlgorithm when connecting.

<code>
ssh -o HostKeyAlgorithms=ssh-rsa root@10.10.0.10
</code>


====Start cli from root shell====

When logging in as root you do not have access to the switch management tooling until you start:

<code>
noscli
</code>


====Save config====

<code>
copy running-config startup-config
</code>


====Back-up config====

A VDX6720 does not provide scp, but a cat via ssh redirected to a file can be used for creating a back-up of the current startup-config:

<code>
ssh -o HostKeyAlgorithms=ssh-rsa root@10.10.0.10 "cat /var/config/vcs/scripts/startup-config" > /data/backup/switch04/`date +%Y-%m-%d`\ -\ startup-config
</code>


====Show running-configuration for one interface====

<code>
show running-config int te 4/0/3
</code>


====Edit multiple interfaces at once====

For a range of interfaces:
<code>
conf t
int te 4/0/3-5
# Now enter the configuration commands that should apply to port 3, 4, and 5.
</code>

For 2 interfaces:
<code>
conf t
int te 4/0/1,6
# Now enter the configuration commands that should apply to port 1, and 6.
</code>
====Show media status====

Show the media status of interface 1 on switch with id 4.
<code>
show media te 4/0/1
</code>

Example output for a recognized SFP:
<code>
sw0# show media int te 4/0/1
  Interface      TenGigabitEthernet 4/0/1
  Identifier     3    SFP
  Connector      33   Copper Pigtail
  Transceiver            d580844104000001 10_GB/s TW Short_dist
  Name           cu
  Encoding       0    
  Baud Rate      103 (units 100 megabaud)
  Length 9u      0   (units km)
  Length 9u      0   (units 100 meters)
  Length 50u     0   (units 10 meters)
  Length 62.5u   0   (units 10 meters)
  Length Cu      3   (units 1 meter)
  Vendor Name    BROCADE         
  Vendor OUI     00:05:1e
  Vendor PN      58-1000025-01   
  Vendor Rev     A
  Wavelength     0   (units nm)
  Options        0012 
  BR Max         0   
  BR Min         0   
  Serial No      CAS2111804520-2 
  Date Code      211026  
  Optical Monitor No
  Temperature    N/A
  Voltage        N/A
  Current        N/A
  TX Power       N/A
  RX Power       N/A
</code>

Example output for un unrecognized SFP:
<code>
sw0# show media int te 4/0/1
  Interface        TenGigabitEthernet 4/0/1
  Optic is not Brocade qualified, optical monitoring is not supported

Transceiver  d580844104000001
  Identifier     3    SFP
  Name           cu
  Vendor Name    FS              
  Vendor OUI     00:00:00
  Vendor PN      SFPP-PC03       
  Vendor Rev     A0  
</code>


====Clear the MAC address table====

<code>
clear mac-address-table dynamic
</code>


====Show interface switchport====

Show interface switchport information:

<code>
sw04# show interface tengigabitethernet 4/0/1 switchport 
 Interface name          : TenGigabitEthernet 4/0/1
 Switchport mode         : trunk
 Fcoeport enabled        : no
 Ingress filter          : enable
 Acceptable frame types  : vlan-tagged only
 Native Vlan             : 1
 Active Vlans            : 1-4,8-10,12-13,15
 Inactive Vlans          : -
</code>


====Show interface status and statistics====

<code>
sw04# show interface tengigabitethernet 4/0/1 
TenGigabitEthernet 4/0/1 is up, line protocol is up (connected)
Hardware is Ethernet, address is 0005.3354.2269
    Current address is 0005.3354.2269
Pluggable media present
Interface index (ifindex) is 17582555136
MTU 2500 bytes
LineSpeed Actual     : 10000 Mbit
LineSpeed Configured : Auto, Duplex: Full
Priority Tag disable
IPv6 RA Guard disable
Last clearing of show interface counters: 3w1d01h
Queueing strategy: fifo
Receive Statistics:
    0 packets, 0 bytes
    Unicasts: 0, Multicasts: 0, Broadcasts: 0
    64-byte pkts: 0, Over 64-byte pkts: 0, Over 127-byte pkts: 0
    Over 255-byte pkts: 0, Over 511-byte pkts: 0, Over 1023-byte pkts: 0
    Over 1518-byte pkts(Jumbo): 0
    Runts: 0, Jabbers: 0, CRC: 0, Overruns: 0
    Errors: 0, Discards: 0
Transmit Statistics:
    47228 packets, 3721254 bytes
    Unicasts: 580, Multicasts: 2493, Broadcasts: 44155
    Underruns: 0
    Errors: 0, Discards: 0
Rate info:
    Input 0.000000 Mbits/sec, 0 packets/sec, 0.00% of line-rate
    Output 0.001072 Mbits/sec, 2 packets/sec, 0.00% of line-rate
Time since last interface status change: 00:23:52
</code>