Notes

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
======Cisco - Router - 2600 - Notes=======

Shopping list for router supporting analog modem dial-in (Configuration verified. See: [[hardware:dialup:dialupathome|Hardware - Dialup - Dialup at home]]):
  * Cisco 2600 Series Router
  * 1x NM-2V
  * 2x VIC-2FXS
  * 1x VWIC-1MFT-E1
  * 1x AIM-VOICE-30

Maximizing the FXS ports in a 2600 series router (FIXME Configuration to be verified. FIXME):
  * 2600XM series or 2691 router.
  * 1x NM-HD-2V
  * 2x VIC-4FXS


=====VWIC-1MFT-T1, VWIC-2MFT-T1, VWIC-2MFT-T1-DI and their E1 equivalents=====

T1/E1 Multi-Flex Trunk VWICs VWIC-1MFT-T1, VWIC-2MFT-T1, VWIC-2MFT-T1-DI can be used for either voice and data or both. \\
Use as a Voice Interface Card requires a Digital Signal Processor (DSP) to exist exist on the network module (NM) in which the VWIC is instaled. \\ 
Appropriate NMs such as an NM-HDV, NM-HDV2, an NM-HD-2VE, or an AIM-VOICE-30 and AIM-ATM-VOICE-30. \\
If installed in a standard WIC slot in a 2600 or 3600 router instead of the WIC slot in a network module (NM) it will function as a WIC wihtout the Voice support, unles an AIM-VOICE-30 or AIM-ATM-VOICE-30 module is also installed in the router.

Source: [[https://www.cisco.com/c/en/us/support/docs/routers/3600-series-multiservice-platforms/8106-vwicmf-t1.html|Cisco - Cisco Digital 1-port and 2-port T1 Multi-Flex Voice WICs]]


=====AIM-ATM, AIM-VOICE-30, AIM-ATM-VOICE-30=====

  * Maximum number of AIM cards installable:
    * 2600: 1
    * 2691, 3660, and 3700 series: 2
  * ATM T1/E1s supported per AIM-ATM(-VOICE) card: 4
  * Requires IOS Plus feature set.

Source: [[https://www.cisco.com/c/en/us/td/docs/ios/12_2/12_2x/12_2xb/feature/guide/ft_gins2.html|Cisco - AIM-ATM, AIM-VOICE-30, and AIM-ATM-VOICE-30 for the Cisco 2600 Series and Cisco 3660]]

<code>
Key Note: Before the introduction of the AIM-VOICE-30, providing digital voice service required the
NM-HDV and analog voice services required the NM-1V/2V or NM-HDA. The AIM-VOICE-30, when used with a
Voice/WAN interface card (VWIC-MFT), can provide digital voice service without using teh NM-HDV.
This frees a valuable network module slot for other applications.
</code>
Source: [[https://usedciscoblog.blogspot.com/2007/06/what-is-difference-aim-atm-aim-atm.html|Cisco Blog - What is the difference? AIM-ATM AIM-ATM-VOICE-30 AIM-ATM-VOICE-30]]