Notes

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
======Hardware - Audio - Soundcards - Linux - ALSA======

[[http://alsa-project.org/|Advanced Linux Sound Architecture (ALSA) project homepage]] \\
[[https://alsa.opensrc.org/|Alsa Opensrc Org]] \\


=====Notes=====

===='aplay -l | grep card' output====

^Card^Slot type^Chipset^Output^Linux distro/version^Remarks^
|Audiotrak Prodigy HD2|PCI|VIA Envy24|card 4: ICE1724 [ICEnsemble ICE1724], device 0: ICE1724 [ICE1724] \\ card 4: ICE1724 [ICEnsemble ICE1724], device 1: ICE1724 IEC958 [ICE1724 IEC958]|Slackware64 14.2|Card is recognised, but does not output sound. Only shows S/PDIF options in alsamixer. Setting jumper JP4 on the card to ON (or OFF) and creating /etc/modprobe.d/alsa-base.conf with 'options snd-ice1724 model=prodigyhd2' as suggested [[http://aulix.com/gyrocom-audiotrak-prodigy-hd2-advance-de-linux-alsa|here]] only changes the card name in aplay -l output and provides a Front volume control in alsamixer, but still no sound output. speaker-test -c2 -twav -Dhw:2,0 complains about: \\ Sample format not available for playback: Invalid argument \\ Setting of hwparams failed: Invalid argument.|
|ASTRO Gaming USB MixAmp|USB| |card 7: MixAmp [ASTRO Gaming USB MixAmp], device 0: USB Audio [USB Audio]|Slackware 14.2 (tested with kernel 5.0.17)|Works out of the box. \\ \\ // Dolby Headphone button does nothing. //|
|ASUS STRIX RAID DLX|PCIe| |card 4: DLX [STRIX RAID DLX], device 0: USB Audio [USB Audio] \\ card 4: DLX [STRIX RAID DLX], device 1: USB Audio [USB Audio #1] \\ card 4: DLX [STRIX RAID DLX], device 2: USB Audio [USB Audio #2]|Slackware64 14.2 (tested with kernel 5.0.20)|Works out of the box.|
|ASUS Xonar D2X|PCIe|AV200|card 0: D2X [Xonar D2X], device 0: Multichannel [Multichannel] \\ card 0: D2X [Xonar D2X], device 1: Digital [Digital]|Slackware64 14.2| |
|ASUS Xonar Essence ST|PCI|AV100|card 4: ST [Xonar ST], device 0: Multichannel [Multichannel] \\ card 4: ST [Xonar ST], device 1: Digital [Digital]|Slackware64 14.2| |
|Asus Xonar Essence STX|PCIe|AV100|card 1: STX [Xonar STX], device 0: Multichannel [Multichannel] \\ card 1: STX [Xonar STX], device 1: Digital [Digital]|Slackware64 14.2| |
|Avid Mbox (3) Mini|USB| |card 11: Mini [Avid Mbox Mini], device 0: USB Audio [USB Audio]|Slackware 14.2 (tested with kernel 5.0.20)|Works out of the box. \\ Supported formats: \\ S16_LE \\ S24_3LE \\ \\ // On the Mini: Be sure to turn the Mix dial all the way up (clockwise) and then set the headphone/speaker volume to the desired level to get sound on headphones or speakers (speakers not tested). //|
|Behringer UCA200|USB|Coolaudio V2902 (DAC)|card 7: CODEC [USB Audio CODEC], device 0: USB Audio [USB Audio]|Slackware64 14.2| |
|Behringer UCA202|USB|PCM2902C (DAC)|card 7: CODEC [USB AUDIO  CODEC], device 0: USB Audio [USB Audio]|Slackware64 14.2| |
|Club3D Theatron Agrippa|PCI|CMI8770|card 3: CMI8762 [C-Media CMI8762], device 0: CMI8738-MC8 [C-Media PCI DAC/ADC] \\ card 3: CMI8762 [C-Media CMI8762], device 1: CMI8738-MC8 [C-Media PCI 2nd DAC] \\ card 3: CMI8762 [C-Media CMI8762], device 2: CMI8738-MC8 [C-Media PCI IEC958]|Slackware64 14.2| |
|Creative Sound Blaster EVO ZxR|USB, Bluetooth|SBAxx1|card 9: ZxR [Sound Blaster EVO ZxR], device 0: USB Audio [USB Audio]|Slackware64-current (14.2+) (tested with kernel 5.3.3)|Only USB connection was tested. Volume control wheel on headphone does not work.|
|Creative Sound Blaster Recon3D|USB|SoundCore3D|card 5: Recon3D [Sound Blaster Recon3D], device 0: USB Audio [USB Audio]|Slackware64 14.2|SBX/THX settings not available unless you configured them on a Windows system and saved the profile to the Recon3D USB. Then you can enable/disable them with the THX TruStudio Pro button on the Recon3D USB.|
|Creative Sound Blaster Tactic3D Alpha|USB| |card 10: Alpha [Sound Blaster Tactic(3D) Alpha], device 0: USB Audio [USB Audio]|Slackware64-current (14.2+) (tested with kernel 5.4.16)| |
|Creative Sound Blaster Tactic3D Rage USB|USB| |card 4: USB [SB Tactic3D Rage USB], device 0: USB Audio [USB Audio]|Slackware 14.2 (tested with kernel 5.2.9)| |
|Creative Sound Blaster X-Fi|PCI/PCIe|EMU20k1 \\ EMU20k2|card 2: XFi [Creative X-Fi], device 0: ctxfi [Front/WaveIn] \\ card 2: XFi [Creative X-Fi], device 1: ctxfi [Surround] \\ card 2: XFi [Creative X-Fi], device 2: ctxfi [Center/LFE] \\ card 2: XFi [Creative X-Fi], device 3: ctxfi [Side] \\ card 2: XFi [Creative X-Fi], device 4: ctxfi [IEC958 Non-audio]|Slackware64 14.2| |
|Creative Sound Blaster Z|PCIe|SoundCore3D|card 2: Creative [HDA Creative], device 0: CA0132 Analog [CA0132 Analog] \\ card 2: Creative [HDA Creative], device 1: CA0132 Digital [CA0132 Digital]|Slackware64 (tested with kernel 5.0.7)|Requires at least kernel 4.18 as Z drivers weren't available in older kernels. All SBX Pro functionality is available via alsamixer. See also:[[https://www.reddit.com/r/SoundBlasterOfficial/comments/9mm5ad/sound_blaster_r3dr3dizzxrae5_linux_driver/|Reddit - r/SoundBlasterOfficial - Sound Blaster R3D/R3Di/Z/ZxR/AE-5 Linux Driver]].|
|Creative Sound Blaster ZxR (with DBpro)|PCIe|SoundCore3D|card 0: Creative_1 [HDA Creative], device 0: CA0132 Analog [CA0132 Analog] \\ card 0: Creative_1 [HDA Creative], device 1: CA0132 Digital [CA0132 Digital]|Slackware64 (tested with kernel 5.0.7)|Requires at least kernel 4.18 as ZxR drivers weren't available in older kernels. All SBX Pro functionality is available via alsamixer. See also:[[https://www.reddit.com/r/SoundBlasterOfficial/comments/9mm5ad/sound_blaster_r3dr3dizzxrae5_linux_driver/|Reddit - r/SoundBlasterOfficial - Sound Blaster R3D/R3Di/Z/ZxR/AE-5 Linux Driver]].|
|Creative Sound BlasterX G5|USB|SBAxx1|card 9: G5 [Sound BlasterX G5], device 0: USB Audio [USB Audio]|Slackware64-current (14.2+) (tested with kernel 5.3.6)|Volume control wheel does not work.|
|Digidesign MBOX 2 Mini \\ Digidesign MBOX 2 Micro|USB| |card 10: M2 [Mbox 2], device 0: USB Audio [USB Audio]|Slackware64 14.2 (tested with kernel 5.0.11)|The MBOX 2 only supports format S24_3BE. See [[hardware:audio:soundcards:digidesign:mbox2mini#linux|Hardware - Audio - Sound cards - Digidesign - MBOX 2 Mini - Linux]] for details and working ~/.asoundrc sample. \\ \\ // On the Mini: Be sure to turn the Mix dial all the way up (clockwise) and then set the headphone/speaker volume to the desired level to get sound on headphones or speakers (speakers not tested). //|
|HyperX Amp|USB| |card 5: Amp [HyperX Amp], device 0: USB Audio [USB Audio] \\ card 5: Amp [HyperX Amp], device 1: USB Audio [USB Audio #1]|Slackware64 14.2 (tested with kernel 5.0.7)| |
|HyperX Cloud II Advanced Audio Control Box|USB| |card 6: Sound [HyperX Virtual Surround Sound], device 0: USB Audio [USB Audio]|Slackware64 14.2| |
|M-Audio Audiophile 192|PCI|Via Envy24 (ICE1724)|card 3: Audiophile192 [M Audio Audiophile192], device 0: ICE1724 [ICE1724] \\ card 3: Audiophile192 [M Audio Audiophile192], device 1: ICE1724 IEC958 [ICE1724 IEC958]|Slackware64 14.2|Card is recognised, but does not output sound via xmms if using ALSA output plugin to hw:X.0 device. Shows PCM volume control and  S/PDIF options in alsamixer. speaker-test -c2 -twav -Dhw:2,0 complains about: \\ Sample format not available for playback: Invalid argument \\ Setting of hwparams failed: Invalid argument. \\ It does work in Audacious with ALSA output plugin set to PCM device: sysdefault:CARC=Audiophile192 (...).|
|M-Audio Fast Track|USB| |card 13: Track [Fast Track], device 0: USB Audio [USB Audio]|Slackware64 14.2 (tested with kernel 5.1.17)|// Both the version with the 3 volume dials on top and the silver-grey version with buttons on the front. // |
|Sennheiser GSX 1200 PRO|USB| |card 4: Audio [GSX 1200 Pro Main Audio], device 0: USB Audio [USB Audio] \\ card 4: Audio [GSX 1200 Pro Main Audio], device 1: USB Audio [USB Audio #1]|Slackware64 14.2|Works. See [[
hardware:audio:soundcards:sennheiser:gsx|Sennheiser GSX]] for .asoundrc settings.|
|Sweex 5.1|PCI|CMI8768|card 2: CMI8768 [C-Media CMI8768], device 0: CMI8738-MC8 [C-Media PCI DAC/ADC] \\ card 2: CMI8768 [C-Media CMI8768], device 1: CMI8738-MC8 [C-Media PCI 2nd DAC] \\ card 2: CMI8768 [C-Media CMI8768], device 2: CMI8738-MC8 [C-Media PCI IEC958]|Slackware64 14.2| |
|Tascam US-100|USB| |card 8: CODEC [USB Audio CODEC], device 0: USB Audio [USB Audio]|Slackware 14.2 (tested with kernel 5.2.9)|// Same chipset as Behringer UCA200? // |
|Terratec Aureon Xfire8.0 HD|USB| |card 5: HD [AUREON XFIRE8.0 HD], device 0: USB Audio [USB Audio] \\ card 5: HD [AUREON XFIRE8.0 HD], device 1: USB Audio [USB Audio #1] \\ card 5: HD [AUREON XFIRE8.0 HD], device 2: USB Audio [USB Audio #2]|Slackware64 14.2|Volume control knob on the unit does not work.|
|Turtlebeach Ear Force Stealth 450|USB| |card 5: E450 [Ear Force Stealth 450], device 0: USB Audio [USB Audio]|Slackware64 14.2 (tested with kernel 5.0.7)| |
|Yamaha UW500|USB| |card 5: UW500 [YAMAHA UW500], device 0: USB Audio [USB Audio]|Slackware64-current (14.2+) (tested with kernel 5.4.28)| |


====Play from commandline and provide output device====

Using ffmpeg (for most audio formats):

<code>
SDL_AUDIODRIVER="alsa" AUDIODEV="hw:0,0" ffplay -nodisp audiofile.flac
</code>
Source:[[https://superuser.com/questions/763683/select-ffplay-audio-out-device|Super User - select ffplay audio out device]]

Using mpg123 (for mp3's only):
<code>
mpg123 -a hw:1,0 audiofile.mp3
</code>


====Dump hardware parameters====

For example, to dump the hardware parameters for a Digidesign MBOX 2:

<code>
arecord --dump-hw-params -D hw:M2,0
</code>

<code>
Recording WAVE 'stdin' : Unsigned 8 bit, Rate 8000 Hz, Mono
HW Params of device "hw:M2,0":
--------------------
ACCESS:  MMAP_INTERLEAVED RW_INTERLEAVED
FORMAT:  S24_3BE
SUBFORMAT:  STD
SAMPLE_BITS: 24
FRAME_BITS: 48
CHANNELS: 2
RATE: 48000
PERIOD_TIME: [1000 1820438)
PERIOD_SIZE: [48 87381]
PERIOD_BYTES: [288 524286]
PERIODS: [2 1024]
BUFFER_TIME: [2000 3640875]
BUFFER_SIZE: [96 174762]
BUFFER_BYTES: [576 1048572]
TICK_TIME: ALL
--------------------
arecord: set_params:1297: Sample format non available
Available formats:
- S24_3BE
</code>
// Here you can see the MBOX2 only supports the S24_3BE (signed 24-bit 3bytes Big Endian) format. //

Source:[[https://sourceforge.net/p/alsa/mailman/message/33820068/|SourceForge - ALSA - Mailing Lists - Re: [Alsa-user] arecord: begin_wave:2480: Wave doesn't support S24_3BE format]] \\


====Midi====

Get a list of midi devices:<code>aplaymidi -l</code>

Example output:

<code>
 Port    Client name                      Port name
 14:0    Midi Through                     Midi Through Port-0
 20:0    USB Midi                         USB Midi MIDI 1
 44:0    Mbox 2                           Mbox 2 MIDI 1
 48:0    Mbox 2                           Mbox 2 MIDI 1
</code>


====DOSbox====

To use the midi device named "USB Midi" on port 20:0 in above output in DOSbox, edit the [midi] part in your DOSbox config in ~/.dosbox/dosbox-VERSION.conf (in my case ~/.dosbox/dosbox-0.74-3.conf) to look like this:

<code>
[midi]
#     mpu401: Type of MPU-401 to emulate.
#             Possible values: intelligent, uart, none.
# mididevice: Device that will receive the MIDI data from MPU-401.
#             Possible values: default, win32, alsa, oss, coreaudio, coremidi, none.
# midiconfig: Special configuration options for the device driver. This is usually the id of the device you wan
t to use.
#               See the README/Manual for more details.

mpu401=intelligent
mididevice=default
midiconfig=20:0
</code>


====Test playback====

Show all soundcards that are recognised by ALSA:
<code>aplay -l | grep card</code>

Test playback on a specific card:
<code>speaker-test -c2 -twav -Dhw:Creative</code>

Test playback on a specific pcm or dmix device definied in a manually edited .asoundrc:
<code>speaker-test -c2 -twav -Ddmixsoundblasterz</code>

// This helps to track down vague error messages in a .asoundrc that sends sound output to multiple soundcards simultaneously. //


=====Route 7.1 channels to 2-channel stereo soundcard=====

For faking a 7.1 channel setup on a stereo soundcard.

Save the below code to ~/.asoundrc and change the pcm.maudiomicrodac part to match your card (see 'aplay -l |  grep card' output):

<code>
pcm.!default {
        type asym
        playback.pcm "plug:stereo2quad"
}

pcm.dmixer  {
        type dmix
        ipc_key 1024
        slave {
                pcm "maudiomicrodac"
                period_time 0
                period_size 1024
                buffer_size 4096
                rate 48000
        }
        bindings {
                0 0
                1 1
                2 0
                3 1
                4 0
                5 1
                6 0
                7 1
        }
}

pcm.stereo2quad {
        type route
        slave.pcm "dmixer"
        ttable.0.0 1
        ttable.1.1 1
        ttable.2.2 1
        ttable.3.3 1
        ttable.4.4 1
        ttable.4.5 1
        ttable.5.4 1
        ttable.5.5 1
        ttable.6.6 1
        ttable.7.7 1
}

pcm.maudiomicrodac {
        type hw
        card DAC
        device 0
        channels 2
}

ctl.dmixer {
        type hw
        card 0
}
</code>

Sources:
  * [[https://bootlin.com/blog/audio-multi-channel-routing-and-mixing-using-alsalib/|bootlin - Audio multi-channel routing and mixing using alsalib]]
  * [[https://unix.stackexchange.com/questions/738631/splitting-the-outputs-of-a-7-1-usb-sound-card-into-4-distinct-stereo-pairs|unix stackexchange - Splitting the outputs of a 7.1 USB sound card into 4 distinct stereo pairs]]
  * [[https://askubuntu.com/questions/106186/how-to-split-7-1-soundcard-outputs-to-4-stereo-outs-with-alsa|askubuntu - How to split 7.1 soundcard outputs to 4 stereo outs with ALSA]]
  * [[https://www.alsa-project.org/main/index.php/Asoundrc|AlsaProject - Asoundrc]]
  * [[https://www.alsa-project.org/alsa-doc/alsa-lib/pcm_plugins.html|AlsaProject - PCM (digital audio) plugins]] PCM plugins extends functionality and features of PCM devices. The plugins take care about various sample conversions, sample copying among channels and so on.
Notes

User Tools

Site Tools

Page Tools
